ILLIG RDM 75K Thermoformer age 1998 and a Inline Illig PLS75b Stacker Counter, age 2006 with Hole Punch Station, for Coffe Capsules, Flower Pots, Cups & Containers
IMG_0000
IMG_0003
IMG_0004
IMG_0006
IMG_0008
IMG_0012
IMG_0014
IMG_0017
IMG_0038
IMG_0040
IMG_0040a
IMG_0042
IMG_5064
IMG_5065
IMG_8266a
IMG_5291a
IMG_8269a
IMG_8265a
IMG_5273a
IMG_5278a
IMG_5276a
IMG_5283a
previous arrowprevious arrow
next arrownext arrow
Shadow

Need an Offer with Video & Photos:

Email: sam@samplastco.com

ILLIG RDM 75K Thermoformer age 1998 & Inline ILLIG PLS75b Stacker Counter age 2006, with Hole Punch Station

ILLIG RDM75K age 1998 with Siemens S5 PLC Controls, used only for ca. 50,000 hrs
ELAU B1 Display with Touchpad controls
Thermoformer with auto-start facility
Indramat Servomotor Indexing
Max. material width 750 mm
Max. Indexing length 480 mm
Top & Lower heaters, total connected load top & bottom heaters 111.3 kW
Auto Transport Rail Spreading for PP
Sheet Sag Control
Max. Forming Area 700 x 450 mm
Hydraulic Cylinder Plug Assist with 
Bosch Rexroth Hydraulic Power Pack, completely Overhauled in 2019 
Max. Part height 150 mm
Max. Mold closing force 25,000 daN
Auto Lubrication system
Siemens S5 PLC Controls
New original ILLIG/ RITTAL Control Cabinet Cooling System added in May-2023.

ILLIG PLS75B Inline Counter/ Stacker, with Hole Punch Station, age 2006
Max. Stacking Area:        750 x 350 mm
Min Height of formed product: 25 mm
Max. height of Formed Product: 150 mm
Min. dia. of product :    Ø 40 mm
Max. dia. of Product:    Ø 150 mm
Max. length of Product Stack:    730 mm
Output rate of Product Stacks: 1200 Stacks/ hr
Rotating Head to neatly remove Products from the Thermoformer Mold
Inline Hole Punch Station
Inline Counter Stacker Station
Compressed Air:        0.2 L at 6 bar, approximately
Total Drive Rating:  19 kW
Electrical specifications:   400 V, 3 phase, 50Hz (N/ PE)
Cross delivery conveyor for counted cups.
All Motors are Indramat Servo Motors
Siemens SIMATIC TOUCH LED Operator Control Panel with Touch Pad Controls
Siemens S7 PLC Controls
Delivers Counted Cups/ Containers at Right Angles to machine direction
* No Tooling or Format Parts are included with the Line.

 

Email: sam@samplastco.com
for a detailed offer, with photos & videos.

If you do not find what you are looking for, contact us on sam@samplastco.com
or on:
🇩🇪 +49175 978 2493   |   🇨🇦 +1416 414 8662  
& we will locate the equipment you need.

Questions?
Please contact us on the above Nos.

The ILLIG PLS75b Stacker/ Counter was dismantled, without making a Video. This is a Video of another exactly the same Model, same condition & same age ILLIG PLS75b Stacker/ Counter in Production